Samsung F270 User Manual Download Page 40

Page: 40 / 219

ETTING

TARTED

.21

Installing Samsung Software

OTES

• Cancel the “New Hardware Found” window when your computer

boots up.

• Make sure that your machine is turned on and connected to your

computer’s parallel port or USB port

before installing

software

. Windows 95 and Windows NT 4.0 do not support the

USB connection.

Insert the supplied CD-ROM into your CD-ROM drive.

The CD-ROM should automatically run and an installation
window appears.

If the installation window does not appear, click

Start

and

then

Run

. Type

X:\Setup.exe

, replacing “

” with the

letter of your drive and click

When the following window opens, connect your machine to
the computer and turn the machine on. Then click

Next

If the machine is already connected and turned on, this
screen does not appear. Skip to the next step.

OTE

: If you click

Next

and the machine is not connected to the

computer, an alert message window appears. After connecting the
machine and turning it on, click

Yes

. Or, if you want to install the

software without the machine, click

Summary of Contents for F270




























































































































































































































Search results

Summary of Contents for F270

Reviews:

Related manuals for F270

Brands by name

Popular brands

Samsung F270, User Manual

Search results

Summary of Contents for F270

Reviews:

Related manuals for F270

Brands by name

Popular brands