5. Unit installation
Installer reference guide / Mono tank integrated type
32
CAUTION
• The units must be installed according to distances declared, in order to permit accessibility from each
side, to guarantee correct operation of maintenance or repairing of the products. The unit’s parts must be
accessible and serviceable under safe working conditions (for people or things).
Installing the unit at a location with strong winds:
• Outdoor unit must be fixed firmly so that it can withstand the wind speed of the strong wind. If you cannot fix the
outdoor unit on the base ground, fixate it sideways or use an extra support structure.
• To prevent exposure to (strong) wind, install a baffle plate on the air discharge side of the unit. (If there is a strong
wind facing the outdoor air outlet, it causes a short circuit. This can lead to performance degradation, broken fan
(motor), and acceleration of frost.)
• Install a wind protection shielding with anticipation of the dominant wind direction. If the direction of the air discharge
part is pointing to the dominant direction of the wind, it could cause performance decrease and potential damage to
the product.
a. Baffle plate
b. prevailing wind direction
c. Air outlet
b
b
a
c
Installation guide at the seashore
Make sure to follow below guides when installing at the seashore.
1
Do not install the product in a place where it is directly exposed to sea water and sea breeze.
–
Make sure to install the product behind a structure (such as building) that can block see breeze.
Sea
Sea
Sea breeze
Sea breeze
Protection wall
Outdoor
unit
Outdoor
unit
Sea
Sea breeze
Outdoor
unit
