GB
Selecting the Colour Mode
NICAM
25
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 34.
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
,
or , buttons to select the
O p t i o n
option.
3
Press the ENTER button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
buttons, until the cursor is
placed on the
N I C A M
option.
5
To...
Press
or , until...
Mono mode
O F F
is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode
O N
is displayed.
ON: Normally set at this position.
6
On completion, press RETURN twice to exit the menu.
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
➢
◆
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
◆
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
,
or , buttons to select the
O p t i o n
option.
3
Press the ENTER button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
buttons, until the cursor is placed
on the
COLOUR SYSTEM
option.
5
Press the button to select
AUTO
➝
P A L
➝
M E S E C A M
➝
B / W
.
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W
Black and White
6
On completion, press RETURN twice to exit the menu.
MAIN MENU
USER SET
RETURN
ENTER
USER SET
COLOUR SYSTEM
: A U T O
NICAM
: O N
IPC
: O N
AUTO POWER OFF
: O F F
RETURN
MAIN MENU
USER SET
RETURN
ENTER
AUTO
PAL
M E S E C A M
B/W
USER SET
COLOUR SYSTEM
: A U T O
NICAM
: O N
IPC
: O N
AUTO POWER OFF
: O F F
RETURN
ON
OFF
Selecting the RF OUT Sound Mode (K-B-M-G-I)
GB
Setting the DVD-VCR Output Channel
24
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
,
or ,
buttons to select the
In s t a l l
option.
3
Press the ENTER button to select this option.
Result:
The
I N S T A L L A T I O N
menu is displayed.
4
Press the
or
buttons, until the cursor is placed on the
V C R
OUTPUT CH
option.
5
Select the required output channel (CH21~CH69) by pressing the
or buttons.
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 14).
You can choose the sound mode (K, B, M, G or I) according to the
TV set connected to your DVD-VCR.
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
,
or , buttons to select the
In s t a l l
option.
3
Press the ENTER button to select this option.
Result:
The
I N S T A L L A T I O N
menu is displayed.
4
Press the
or
buttons, until the cursor is placed on the
T V
S Y S T E M
option.
5
Press the
or button to select K, B, M, G or I.
6
On completion, press RETURN to exit the menu.
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
MAIN MENU
CH21
CH36
CH69
INSTALLATION
RETURN
ENTER
MAIN MENU
INSTALLATION
RETURN
ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
G
I
K
B
M
VCR
VCR
VCR
VCR
00046B DVD-V85K/XSH-GB2 11/9/02 9:30 AM Page 24