GB
Presetting the Stations Manually
21
☛
You do not need to preset the stations manually if you
have already set them automatically.
1
Press the SETUP button on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
,
or , buttons to select the
Install
option.
3
Press the ENTER button to select this option.
Result:
The
I N S T A L L A T I O N
menu is displayed.
4
Press the corresponding
or
buttons, until the
MANUAL SET
U P
option is selected.
5
Press the ENTER button to select a
MANUAL SET UP
option.
Result:
The
TV STATION TABLE
menu is displayed.
6
Press the
or
buttons to select a programme number as
required.
7
Press the button to preset the station.
Result:
The
MANUAL TUNING
menu is displayed.
8
Press the
or
buttons to start scanning.
Result:
The frequency band is scanned and the first station
found is displayed.
9
If you...
Then...
Wish to store the
◆
Press the
or
buttons until the
M F T
station displayed
is selected.
◆
Press the
or
buttons to adjust the
picture, if necessary.
◆
Press ENTER to store the station
Do notwish to
◆
Press the
or
buttons until the
store the station
C H
is selected.
displayed
◆
Press the
or
buttons to go on
scanning the frequency band and display
the next station
◆
Go back to the beginning of step
9
10
Repeat this procedure from Step
6
onwards, until all the required
stations have been stored.
11
On completion, press the RETURN button three times to exit the
menu.
GB
20
Presetting the Stations Automatically
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆
Plug & Auto Set up (see page 13)
◆
Automatically
◆
Manually (see page 21)
You can store up to 50 stations.
1
Press the SETUP button on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
,
or , buttons to select the
I n s t a l l
option.
3
Press the ENTER button to select this option.
Result:
The
I N S T A L L A T I O N
menu is displayed.
4
Press the corresponding
or
buttons, until the
AUTO SET
U P
option is selected.
And then press the ENTER button to select this option.
Result:
The SYSTEM SELECT menu is displayed.
5
Press the corresponding
,
or , buttons to select the your
SYSTEM SELECT
.
6
Press ENTER button.
Result:
A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
7
Press ENTER to start the auto scanning.
Result:
◆
The
P L E A S E W A I T
indication flashes on the
television screen.
◆
The first frequency band is scanned and the first
station found is displayed and stored.
◆
The DVD-VCR then searches for the second station
and so on.
◆
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
➢
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
8
If you wish to cancel the auto scanning before the end, press the
RETURN button three times to exit the menu.
➢
◆
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 22).
MAIN MENU
INSTALLATION
RETURN
ENTER
MAIN MENU
INSTALLATION
RETURN
ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
ENTER
SYSTEM SELECT
SYSTEM-B/G
S Y S T E M - D / K
SYSTEM-I SYSTEM-B/B
U.S-ANT U.S-HRC
U.S-IRC JAPAN
RETURN
ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
ENTER
AUTO SET UP
PLEASE WAIT
2
%
I - - - - - - - - - - - - - - - - - - - - I
RETURN
YOUR DATA WILL BE LOST
PRESS
E N T E R
TO CONTINUE
R E T U R N
TO EXIT
TV STATION TABLE
PR CH SYSTEM
1
2
3
4
5
SWAPPING:ENTER
RETURN
DELETE:CLEAR
MANUAL TUNING
SYSTEM
: B/G
P R
: 1
C H
: ---
M F T
: -
MEMORY:ENTER
RETURN
VCR
VCR
00046B DVD-V85K/XSH-GB2 11/9/02 9:30 AM Page 20
