English
_23
●
CONNECTING & SETTING UP
connecting & setting up
CONNECTING THE HDD & DVD RECORDER
Disconnect the aerial cable from your TV and connect it to RF IN (FROM ANT.) connector on the rear
panel of the HDD & DVD Recorder.
Connect RF OUT (TO TV) connector of the HDD & DVD Recorder and the aerial input of your TV using the
supplied aerial cable.
Use the Video/Audio Cable to connect ANALOG AUDIO OUT(R/L)/VIDEO OUT jacks on the HDD & DVD
Recorder to the Audio &Video jacks on the TV.
Plug in the HDD & DVD Recorder and TV.
Turn on the HDD & DVD Recorder and TV.
Press the INPUT SEL. button on your TV remote control until the Video signal from the HDD & DVD
Recorder appears on the TV screen.
The RF cable connection of this product sends only signals of TV.
You must connect Audio/Video cables to watch a DVD from your HDD & DVD Recorder.
Power off HDD & DVD Recorder, then you can watch programmes received through 2 RF cable.
1.
2.
3.
4.
5.
6.
M
To RF IN
To TV
To ANT INPUT
RF Cable
Wall
01721A-SH873,5,7-XSA-ENG.indb 23
01721A-SH873,5,7-XSA-ENG.indb 23
2008-06-19 오후 1:59:06
2008-06-19 오후 1:59:06