C
onnec
ting & S
etting Up
English - 19
Connecting HDMI/DVI to a TV
(DVD-R155 only)
If your TV has a HDMI/DVI input, connect HDMI/DVI cable to
a TV. You will enjoy the best quality images and sounds.
• Case 1
: Connecting to a TV with HDMI Jack
• Case 2
: Connecting to a TV with DVI Jack
Case 1 : Connecting to a TV with HDMI Jack
• Using the HDMI cable (not supplied) connect the
HDMI OUT
jack on the rear of the DVD Recorder to the
HDMI IN
jack of
your TV.
• Press the input selector on your TV remote control until the
HDMI signal from the DVD Recorder appears on your TV
screen.
Case 2 : Connecting to a TV with DVI Jack
• Using the DVI Adapter Cable, connect the
HDMI OUT
jack on
the rear of the DVD Recorder to the
DVI IN
jack of your TV.
• Using the audio cables, connect the
AUDIO (red and white)
OUT
jacks on the rear of the DVD Recorder to the
AUDIO (red
and white) IN
jacks of your TV. Turn on the DVD recorder and TV.
• Press the input selector on your TV remote control until the
DVI signal from the DVD Recorder appears on your TV screen.
To watch through the HDMI output, set the digital
audio output to PCM. See page 27.
Depending on the HDMI device (TV/HDMI Receiver)
you use, audio may not be supported. If TV does
not support Dolby digital/DTS, Audio output is not
available when you set Digital output as Bitstream or
select DTS On in Audio setup menu. In this case, set
the digital audio output to PCM or DTS Off .
If you connect the HDMI cable between Samsung TV,
you can operate easily DVD Recorder using the TV
remote control. (This is only available with Samsung
TVs that support (HDMI-CEC).) (See page 26)
Please check the logo (If your TV has an
logo, then it supports function.)
▌
▌
■
■
■
■
To change HDMI output resolution, see page 30.
HDMI (High Defi nition Multimedia Interface)
HDMI is an interface to enable the digital transmission
of video and audio data with just a single connector.
Since HDMI is based on DVI, it is completely
compatible with DVI. The only diff erence between
HDMI and DVI is that HDMI supports multi-channel
audio.
Using HDMI, the DVD recorder transmits a digital
video and audio signal and displays a vivid picture on
a TV having an HDMI input jack.
HDMI connection description
HDMI connector - Both uncompressed video data and
digital audio data (LPCM or Bit Stream data).
- Though the DVD recorder uses a HDMI cable, the
DVD recorder outputs only a pure digital signal to
the TV.
- If TV does not support HDCP (High-bandwidth
Digital Content Protection), snow noise appears on
the screen.
Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal.
However, when playing a DVD, the data transmitted
to a TV is digital. Therefore either a digital-to-analog
converter (in the DVD Recorder) or an analog-to-
digital converter (in the TV) is required. During this
conversion, the picture quality is degraded due to
noise and signal loss. HDMI technology is superior
because it requires no D/A conversion and is a pure
digital signal from the DVD recorder to your TV.
What is the HDCP?
HDCP (High-bandwidth Digital Content Protection)
is a system for protecting DVD content outputted
via HDMI from being copied. It provides a secure
digital link between a video source (PC, DVD. etc)
and a display device (TV, projector. etc). Content
is encrypted at the source device to prevent
unauthorized copies from being made.
■
■
■
■
■
■
01273A(01)R150,155-XEU-ENG.indb 19
01273A(01)R150,155-XEU-ENG.indb 19
2007-02-27 오후 4:35:37
2007-02-27 오후 4:35:37
Downloaded From Disc-Player.com Samsung Manuals
