manualshive.com logo in svg

Samsung DVD-C700, Service Manual, Page: 68 / 133

Share
Download
Samsung DVD-C700 Service Manual Download Page 68

Circuit Descriptions

Samsung Electronics

5-19

5-7 Audio

5-7-1 Outline

The four data (Data 0~3) outputted from A/V decoder (VIC1 ; ZiVA-3) are supplied to DATA 0 for 2-channel
mixed audio output and to DATA 1~3 for Analog audio output (5.1-channel).
The audio data (0~3) transmitted from A/V decoder (VIC1 ; ZiVA-3) are converted into analog signal via audio
D/A converter and outputted via post filter and amplifier.
CD and VCD are outputted with only 2 channels audio data and transmit them to Data 0 and Data 1. 
Front L/R channel is outputted in mixed audio output (L/R output) and analog audio output and surround L/R,
center and subwoofer aren’t outputted.
If DVD of 2 channels source disc is used, it is outputted by the same way with CD and VCD. 
If 5.1-channel source disc, front L/R channel is outputted in Data 1, Surround L/R in Data 2 and Center/Sub-
woofer in Data 3. At that time, 5.1 channel can be downmixed in 2 channel in Data 0. 

AIC2

AK4324

D/A CONVERTER

POST

FILTER

POST

FILTER

AIC1

AK4324

D/A CONVERTER

POST

FILTER

POST

FILTER

POST

FILTER

POST

FILTER

POST

FILTER

POST

FILTER

AMP

AMP

AMP

AMP

AMP

AMP

AMP

AMP

AIC3

AK4324

D/A CONVERTER

AIC4

AK4324

D/A CONVERTER

VIC1

(ZiVA-3)

A/V Decoder

DATA0
LRCK
BCK

DATA1

DATA2

DATA3

CENTER

SURROUND-L

SURROUND-R

L

R

FRONT-L

FRONT-R

SUB WOOFER

Mixed Audio Output (2-Channel)

Analog Audio Output (5.1-Channel)

Fig. 5-24 Audio Output Block Diagram

Summary of Contents for DVD-C700






































































































































Reviews:

No comments