DSR9400 FT
A, EM VIA
GB-14
DSR9400 FT
A, EM VIA
GB-15
D
I
G
I
T
A
L
S
A
T
E
L
L
I
T
E
R
E
C
E
I
V
E
R
GB
OPERATING THE RECEIVER
Main Menu
After installing your antenna system and DSR9400 with appropriate connectors.
●
Plug in the AC main power and switch on the receiver.
●
Press
MENU
key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed from 1 to 5.
For the sub-menus 1, 2 and 3 you need the PIN code.
●
You must follow the help message at the bottom
of the screen!
Before you begin with the "Installation"
menu, you should check in the 4th menu
"System Setup" whether all the information
there is applicable for you.
1. Installation
The menu provides settings for customizing, adding new services and displaying
the status of the receiver.
●
Select "
Installation
" in the main menu mode to
select the sub menu.
●
Enter the
PIN
code.
If you have not entered your own
PIN
code
then the
PIN
code
0000
applies, which was
set at the factory.
8. Teletext OSD
When the current broadcasting program provides
Teletext OSD, press the
Green (
)
key twice
to see the current Teletext OSD list.
To change the Teletext OSD:
●
Use the / keys to select a
Teletext OSD
you want.
●
Press the
key and then the
Teletext OSD
you want is displayed on the screen.
9. Teletext VBI
When the current broadcasting program provides
Teletext VBI
, press the
Green (
)
key three times
to see the current Teletext VBI list.
To change the Teletext VBI:
●
Use the / keys to select a
Teletext VBI
you want.
●
Press the
key and then the
Teletext VBI
you want is displayed on the screen.
BASIC FUNCTION
DSR9400-GB_4.0 6/24/03 1:37 PM Page 14
