Samsung DMR57 Series, Training Manual

Page: 55 / 71

55
1) Place the dishwasher on its back so that
you can see the base. Remove the two (2)
screws that hold the base and the shutter
in place.
2) Remove the leakage sensor connector
(white) inside the shutter.
3) Remove the two (2) distributor motor
connectors.
4) Remove the two (2) screws that hold the
distributor motor in place.
(You can remove one of the two screws
through the hole in the base.)
Pull the distributor motor out.
※
Check List
▶ Check PCB: Check CN1-CN14 voltage: (120VAC)
▶
Check the voltage of Synchronous Motor: (120VAC)
▶ Check the resistance of Synchronous Motor: (2.6k Ω )
Distributor Disassembly
1. 2.
3. 4.
Place the dishwasher on its back so that you can see the base. Remove the two (2)
screws that hold the base and the shutter in place. Remove the leakage sensor
connector (white) inside the shutter. Remove the two (2) distributor motor
connectors. Remove the two (2) screws that hold the distributor motor in place.
(You can remove one of the two screws through the hole in the base.) Pull the
distributor motor out.