Samsung DMR57 Series, Training Manual, Page: 51 / 71

51
5) Remove the 2 screws holding the cover
fan in place.
6) Hold and remove both the case vent ASSY
and the duct condenser ASSY.
[Caution]
- Be careful while removing them as the
duct condenser is touching the bracket
door link.
7) Remove the 2 screws holding the fan
motor from the case vent ASSY. And
carefully pull out the fan motor.
8) Remove the duct condenser from the case
vent ASSY (3 screws).
※ Check List
▶
Because there is a risk of leakage after
replacement, check whether it is sealed
properly.
▶ Check the voltage of Fan Vent ends: 120V
▶
PCB RELAY : Check CN1 ~ CN14(120V)
▶ Measure coil resistance of both ends: 150 Ω
Fan Vent Disassembly Part 2
5.
6.
7.
8.
5. Remove the 2 screws holding the cover fan in place. 6. Hold and remove both
the case vent ASSY. and the duct condenser ASSY. [Caution] - Be careful while
removing them as the duct condenser is touching the bracket door link. 7. Remove
the 2 screws holding the fan motor from the case vent ASSY. And carefully pull out
the fan motor. 8. Remove the duct condenser from the case vent ASSY (3 screws).
Careful not to scratch or dent the stainless steel covers or the damage the
customer's floor or cabinets.