Samsung DIGIMAX V4 Instructions Manual Download Page 58

Page: 58 / 90

READY

Starting Play Mode

Turn the camera on and select the Play mode by pressing the play mode button. The camera can

now play back the images stored on a memory.

You can set up the PLAY mode function by using the camera buttons and LCD monitor.

1. Select the PLAY mode by pressing the play mode button.

2. The last image stored on the memory is displayed on the

LCD monitor.

3. Select an image that you want to play back by pressing LEFT

/ RIGHT button.

Playing back a still image

INFORMATION

Even though the camera power is off, you can start the play mode by pressing the play

mode button.

The LCD monitor will remain in operation until the camera is switched off in PLAY mode.

The menu will not display on the LCD monitor under the following circumstances:

- When another button is being pressed.

- While image data is being processed

- When there is no battery capacity.

161

Summary of Contents for DIGIMAX V4



























































































Search results

Summary of Contents for DIGIMAX V4

Reviews:

Related manuals for DIGIMAX V4

Brands by name

Popular brands

Samsung DIGIMAX V4, Instructions Manual

Search results

Summary of Contents for DIGIMAX V4

Reviews:

Related manuals for DIGIMAX V4

Brands by name

Popular brands