Samsung DIGIMAX V4 Instructions Manual Download Page 61

Page: 61 / 90

You can view up to 9 images at a time and trim an image.

The last image stored on the memory is displayed on the LCD monitor.

Press 5 function button and you can play back another images.

Thumbnail display ( )

- Press the thumbnail button.

- The thumbnail display will highlight the image that had been showing at the time the thumbnail

mode was selected.

- Press the 5 function button to move to desired image.

To view an image separately, press the enlargement button( ).

Information button

The last image stored on the memory is displayed on the LCD monitor.

Pressing the LCD button in the PLAY mode will change the display as shown below.

161

Image & OSD

Pressing the

information

button

Pressing the

information

button

Pressing the

information

button

Image only

Image & information

Thumbnail/ Enlargement/ Trimming button

161

Normal display mode

161

Thumbnail display mode

Pressing the

thumbnail button

Highlighted image

Summary of Contents for DIGIMAX V4



























































































Search results

Summary of Contents for DIGIMAX V4

Reviews:

Related manuals for DIGIMAX V4

Brands by name

Popular brands

Samsung DIGIMAX V4, Instructions Manual

Search results

Summary of Contents for DIGIMAX V4

Reviews:

Related manuals for DIGIMAX V4

Brands by name

Popular brands