Samsung DIGIMAX V4 Instructions Manual Download Page 25

Page: 25 / 90

Starting Herecording mode

1. Insert the batteries (p.26).

Insert the batteries taking note of the polarity (+ / -).

2. Insert the memory card (p.29).

3. Close the memory card cover.

4. Slide the power switch to turn on the camera.

5. Select the PROGRAM mode by rotating the mode dial.

6. Point the camera towards the subject and compose the image by using either the viewfinder or LCD

monitor.

7. Press the shutter button to capture an image.

Recording a still image

Program mode

161

[RROGRAM mode]

INFORMATION

There are two LED lamps (one green, one red) positioned next to the viewfinder.

- If the camera is in focus when you press the shutter button halfway, the green LED will light

up and you can take an image. If the camera can focus on the subject, the autofocus frame

in the center of the LCD monitor will change from white to green.

- If the red lamp lights up, the flash can fire.

- If the red lamp blinks, the flash is being charged.

- When an image is being stored onto the memory card, the green lamp blinks slowly.

When the image data has been stored, the green LED light will go out.After the green LED

light has gone out, you can resume taking images.

NOTICE

Blinking the autofocus indicator lamp means that the camera cannot focus on the subject.

Should this be the case, the camera cannot make beautiful photography.

Summary of Contents for DIGIMAX V4



























































































Search results

Summary of Contents for DIGIMAX V4

Reviews:

Related manuals for DIGIMAX V4

Brands by name

Popular brands

Samsung DIGIMAX V4, Instructions Manual

Search results

Summary of Contents for DIGIMAX V4

Reviews:

Related manuals for DIGIMAX V4

Brands by name

Popular brands