Samsung DIGIMAX A40, User Manual

Page: 93 / 124

《
93
》
Before contacting a service centre
Camera does not take images when pressing the Shutter button
ㆍ
There is insufficient memory capacity
→ Delete unnecessary image files
ㆍ The memory card has not been formatted
→
Format the memory card (p.82)
ㆍ The memory card is exhausted
→
Insert a new memory card
ㆍ The memory card is locked
→
Refer to [CARD LOCKED!] error message (p.91)
ㆍ
The camera’s power is off
→ Turn the camera power on
ㆍ
The battery are exhausted
→ Insert fresh batteries.
ㆍ
Battery is inserted incorrectly with the polarities reversed
→ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ㆍ The camera was stopped due to a malfunction
→
Remove /re-insert battery and switch the camera on
The images are unclear
ㆍ
A picture was taken within 0.8m from the subject without setting an appropriate macro mode
→ If the subject is closer than 0.8m, select macro shot mode
ㆍ
The picture was taken with the subject beyond the flash range
→ Take a picture within the flash range
ㆍ
The lens is smudged or dirty
→ Clean the lens
The flash does not fire
ㆍ Flash off mode has been selected
→
Dis-engage flash off mode
ㆍ The camera mode can’t use the flash
→
Refer to the FLASH instruction (p.33)
Incorrect date and time is displayed
ㆍ
The date and time have been set incorrectly or the camera has adopted the default settings
→ Reset the date and time correctly