E-
30
Assigning Address to Indoor Unit
Before installing the indoor unit, assign an address to the indoor unit
according to the air conditioning system plan.
1
The address of the indoor unit is assigned by adjusting MAIN(SW02) and
RMC(SW04) rotary switches.
2
It is required to set the RMC address if you install the wired remote controller
and/or the centralized controller.
3
If you install optional accessories such as the wired remote controller, centralized
controller, etc. see an appropriate installation manual.
4
If an optional accessory is not installed, you do not have to set the RMC
address. However, adjust K1 and K2 switches of the SW05 DIP switch to "ON"
position in this case.
5
SW05
SW02
SW04
SW07
SW06
K1 K2 K3 K4
SW05
SW06
K5 K6 K7 K8
SW07
K9 K10 K11K12
SW02
SW04
Summary of Contents for DH60 T Series
Page 44: ......
