Samsung DCS KEYSET User Manual Download

Page: 58 / 76

– 49 –

Automatic Hold

While on an outside call, pressing a line key, route key or a flashing

CALL

key will automatically put your call on hold and connect you to

the next call. This feature can be turned on or off at your keyset.

1. While on-hook, press the

TRSF

key and dial

110

2. Dial

001

to turn Automatic Hold on or

000

to turn it off. (Or use

the soft keys and

VOLUME

Up/Down keys to select.)

3. Press the

TRSF

key to store your selection.

Headset Operation

You can switch between headset mode and handset mode easily.
When using headset mode, you press the

ANS/RLS

key to answer and

release calls.

1. While on-hook, press the

TRSF

key and dial

110.

2. Dial

021

to use the headset [Headset Use: On] or

020

to use the

handset [Headset Use: Off]. (Or use the soft keys and

VOLUME

Up/Down keys to select.)

3. Press the

TRSF

key to store your selection.

Note: When you are in headset mode, your speakerphone is disabled and the

ANS/RLS

key will light steady.

Hot Keypad

Your keyset’s keypad can be made “live” or “hot” so that it is not
necessary to lift the handset or press the

SPEAKER

key before you

begin dialling. Calls can be made and features activated by simply
dialling the line number, trunk group access code, internal number or
feature access code. To activate this feature:
1. While on-hook, press the

TRSF

key and dial

110.

2. Dial

031

to turn the Hot Keypad on or

030

to turn it off. (Or use

the soft keys and

VOLUME

Up/Down keys to select.)

3. Press the

TRSF

key to store your selection.

Summary of Contents for DCS KEYSET













































































Search results

Summary of Contents for DCS KEYSET

Reviews:

Related manuals for DCS KEYSET

Brands by name

Popular brands

Samsung DCS KEYSET, User Manual

Search results

Summary of Contents for DCS KEYSET

Reviews:

Related manuals for DCS KEYSET

Brands by name

Popular brands