8
ENG
1
Connect an optional AUDIO/VIDEO cable from the VIDEO OUT jack on
the rear of the VCR to the VIDEO IN jack on the rear of the TV.
2
Connect another optional audio/video cable from the AUDIO OUT jacks on
the rear of the VCR to the AUDIO IN jacks on the rear of the TV.
◆
If you have a VCR with 21 pin scart jack, connect scart cable to the
rear of TV (Option).
3
Press the TV/VIDEO button to select “AV”.
◆
As you press the button, TV, AV1, AV2, AV3, S-VIDEO1, and
S-VIDEO2 are repeated alternately.
TV
➞
S-VIDEO1
➞
S-VIDEO2
➞
AV1
➞
AV2
➞
AV3
if connected
4
Playback a tape in the VCR.
(See owner’s Manual for VCR)
☛
Self Checkup Function
◆
When all front and rear jack of this TV are
disconnected, the video mode changes as below.
TV
➞
AV3
(When only AV1 Jack is connected)
TV
➞
AV1
☛
TV/Video Selection
◆
Press the TV/VIDEO button repeatedly to select the
desired input.
◆
Whenever the TV/VIDEO button is pressed, the mode
changes as below.
TV
➞
S-VIDEO1
➞
S-VIDEO2
AV3 AV2
AV1
(when all input jacks are connected)
➣
◆
When video mode is selected and that AV mode has no
input picture signal, the background colour of the TV
screen will change to blue regardless of whether the
BLUE-SCREEN function is set.
◆
Teletext displays on screen will not be output at the
Monitor output terminal and Scart output terminal.
◆
AV mode isn’t selected when VCR wasn’t operating, so you
must check VCR status before selecting AV mode.
➞
➞
➞
R
I
AUDIO
I
L
(MONO)
VIDEO3
INPUT
S-VIDEO2
INPUT
VCR
AUDIO OUT
(R)
(L)
VIDEO OUT
Rear of TV (Option)
Side of TV
➞
➞
➞
S-VIDEO1
VHF/UHF
75
Ω
S-VIDEO1
VHF/UHF
75
Ω
VCR
MONITOR
-OUT
AV-2
VIDEO
AV-1
(MONO)
L-AUDIO-R
AV-2
AV-1
RGB
VCR
AUDIO OUT
(R)
(L)
VIDEO OUT
Video Connections
11068A#2-767A 11/28/05 2:45 PM Page 8