13
ENG
The mains lead is attached to the rear of the television.
1
Plug the mains lead into an appropriate wall socket.
◆
Use a wall socket with a:
- Voltage of between 100 and 250 volts.
- Frequency of either 50 or 60 Hz.
2
Press the POWER button on the front panel to switch the television on.
◆
If you have already stored channels, the channel selected when you
last switched your television off appears on the screen.
◆
If you have not yet stored any channels; no clear picture appears.
Refer to “Auto store” on page 14, 15 or “Manual store” on page 16, 17.
3
Press the POWER button on the front panel to switch the television off.
➣
You can execute every operation by pressing CH
▲
or
CH
▼
buttons and VOL+ or VOL– buttons alternately
because of identified operation method, if you learn one
method, you can easily operate another function by
viewing the picture.
Pressing these buttons alternately makes every operation easy.
Picture change
Press VOL+ or VOL– buttons to change picture
Function Input
by inputting selected function.
MOVE
Press CH
▲
or CH
▼
buttons to move your desired Menu.
S.STD
SURROUND S.MODE
P.STD
P.SIZE
MENU
CH
VOL
VOL
ROTATE
MULTI
PIP
ON
ns
V
Switching your Television On and Off
Remote Control
11068A#2-767A 11/28/05 2:45 PM Page 13
