Samsung CLP-680ND: CLP-775ND, User Manual

Page: 21 / 270

21
1. Introduction
Installing the driver locally
A locally connected machine is a machine directly attached to your computer
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine’s driver (see
"Installing driver over the network" on page 137).
• If you are a Mac, Linux
,
or UNIX operating systems user, refer to the
"Installation for Mac" on page 128 , "Installation for Linux" on page 130, or
"Installing the UNIX printer driver package" on page 142 .
• The installation window in this User’s Guide may differ depending on the
machine and interface in use.
• Only use a USB cable no longer than 3 meters (118 inches).
12
Windows
1 Make sure that the machine is connected to your computer and
powered on.
If the “ Found New Hardware Wizard ” appears during the installation
procedure, click Cancel to close the window.
2
Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run .
X:\ Setup.exe replacing “X” with the letter, which represents your CD-
ROM drive and click OK .
3 Select Install Now .
4
Follow the instructions in the installation window.
You can select the software applications in the Select Software to Install
Window.