Samsung CLP-310, Service Manual

Page: 24 / 146

Product spec and feature
Service Manual
2-13
Samsung Electronics
③
2nd Transfer Ass’y
• The life span: Print over 100,000 sheets (in 15~30 )
• Specification: Similar to CLP-300 Series
④
Fuser Ass’y
This unit consists of Heat Roller, a Thermostat and a Thermistor. It melts and fuses the toner, transferred
by the transfer roller onto the paper, by applying pressure and high temperature to complete printing job.
* Heat Lamp : Kunckle Type
* Fusing system : 3-Roll Fusing type
- Heat roller : Pipe type (Lamp inside)
- Pressure roller
- Pressure roller Shaft
* Thermistor - Temperature-Measuring Device
* Thermostat - Critical Temperature-Detecting Device
* The life span – 100k(black)/color(25k)
Thermostat
When a heat lamp is overheated, a Thermostat cuts off the main power to prevent over-heating.
- Non-Cotact type Thermostat
Heat roller
The heat roller transfers the heat from the lamp to apply a heat on the paper. The surface of a heat
roller is coated with Teflon, so toner does not stick to the surface.
Pressure roller
A pressure roller mounted under a heat roller is made of a silicon resin, and the surface also is coated
with Teflon. When a paper passes between a heat roller and a pressure roller, toner adheres to the surface
of a paper permanently.