Samsung CLP-310 Service Manual Download Page 105

Page: 105 / 146

Alignment & Troubleshooting

Service Manual

4-48

Samsung Electronics

4.2.5 Common Windows Problems

NOTE:

Refer to the Microsoft Windows 98/Me/NT 4.0/2000/2003/XP User’s Guide that came with your PC

for further information on Windows error messages.

"File in Use" message appears

during installation.

Exit all software applications. Remove all

software from the StartUp Group, then

restart Windows. Reinstall the printer driver

"Error Writing to LPTx"

message appears.

Ensure that all cables are connected

correctly and the printer is on.

If bi-directional communication is not

turned on in the driver, it will also cause

this message.

"General Protection Fault",

"Exception OE", "Spool32", or "Illegal

Operation" messages

appear.

Close all other applications, reboot

Windows and try printing again.

"Fail To Print", "A printer

timeout error occurred."

messages appear.

These messages may appear during printing.

Just keep waiting until the printer finishes

printing. If the message appears in standby

mode or after printing has been completed,

check the connection and/or whether an

error has occurred.

Summary of Contents for CLP-310



















































































































































Search results

Summary of Contents for CLP-310

Reviews:

Related manuals for CLP-310

Brands by name

Popular brands

Samsung CLP-310, Service Manual

Search results

Summary of Contents for CLP-310

Reviews:

Related manuals for CLP-310

Brands by name

Popular brands