21
GB
Remembering Function (CE2974N/CE2974NT)
This oven remembers the last cooking power level for your
convenience.
✉
•
When cooking is over, the end reminder signal will beep 3
times.(Chime bell per 1min). And then, cooking mode will be
“RESET” and the oven will forget the last cooking mode.
•
If there’s no operation after the door is opened and closed
once, the cooking mode will be “RESET” after 30 seconds.
•
Press the Cancel(
) button and then cooking mode will be
“RESET”.
Manual Stop Turntable Function
The turntable on/off(
) button enables you to use large dishes which
fill the whole oven by stopping the turntable from rotating.
☛
The results will be less satisfactory in this case as the cooking is
less even. We recommend that you turn the dish by hand halfway
through the cooking process
☛
Warning! Never operate the oven without local when turntable
button is off.
•
Result:
This condition may cath fire and extre damage the
oven.
Model : CE2974N/CE2974NT
✉
Don’t press Turntable on/off(
) button during cooking process.
The turntable doesn’t rotate when the lamp is “ON”.
Model : CE2914N/CE2914NT
✉
Don’t press Turntable on/off(
) button during cooking process.
1.
Set the add some cooking time by turning the dial knob.
2.
Press the
button.
1.
Press the Turntable on/off(
) button.
Result:
The following indication is displayed.
The turntable will not rotate.
2.
To switch the turntable rotating back on, press the
Turntable on/off(
) button again.
Result:
The turntable will rotate.
Push the Turntable on/off(
) button.
Result:
If the turntable button can be pressed, it will
rotate. If the turntable button pop, it will not
rotate.
CE2974-GB.fm Page 21 Thursday, November 21, 2002 5:21 PM
