4 Alignment and Adjustments
CA17K*/CA17J*
4-3
CONFIDENTIAL
4-2-4 Linearity
Linearity affects the symmetry of images as they
appear on the screen. Unless each row or column
of blocks in a crosshatch pattern is of equal size,
or within the tolerances shown in Tables 4-2 and
4-3, an image appears distorted, elongated or
squashed.
Table 4-1. Standard Modes Linearity: 640x480/85Hz,
800x600/85Hz and 1024x768/85Hz
Table 4-2. Other Modes Linearity: VGA, SVGA, XGA,
MAC, etc.
4-2-4 (a) HORIZONTAL LINEARITY ADJUSTMENT
CONDITIONS
Scanning frequency:
68 kHz/85 Hz
Display image:
Crosshatch pattern
Brightness:
Maximum
Contrast:
Maximum
To adjust the Horizontal Linearity, refer to Tables
4-2 and 4-3 for the tolerance range.
Increase or decrease
H_LIN
to optimize the
image.
4-2-4 (b) VERTICAL LINEARITY ADJUSTMENT
CONDITIONS
Scanning frequency:
68 kHz/85 Hz
Display image:
Crosshatch pattern
Brightness:
Maximum
Contrast:
Maximum
To adjust the Vertical Linearity, refer to Tables 4-2
and 4-3 for the tolerance range.
Use control bar after selecting
“V-LINEARITY
BAL”
in left menu to optimize the image.
4-2-5 Trapezoid Adjustment
CONDITIONS
Scanning frequency:
68 kHz/85 Hz
Display image:
Crosshatch pattern
Brightness:
Maximum
Contrast:
Maximum
Use control bar after selecting
“TRAPEZOID”
in
left menu to make the image area rectangular.
Figure 4-4. Trapezoid
4-2-6 Pinbalance Adjustment
CONDITIONS
Scanning frequency:
68 kHz/85 Hz
Display image:
Crosshatch pattern
Brightness:
Maximum
Contrast:
Maximum
Figure 4-5. Pinbalance
Use control bar after selecting
“PINBALANCE”
in
left menu to optimize the image.
| A - B | < 4 mm
A
B
B
A
4 : 3
5 : 4
Horizontal: 20.5~23.5
Vertical :
20.5~23.5
Horizontal: 19.18~22.07
Vertical :
20.5~23.5
Supported Timing Mode
Each block (14 %)
Difference between
adjacent blocks (5 %)
Horizontal: Less than 1.10 mm
Vertical : Less than 1.10 mm
Horizontal: Less than 1.03 mm
Vertical : Less than 1.10 mm
4 : 3
5 : 4
Horizontal: 20.9~23.1
Vertical : 20.9~23.1
Horizontal: 19.60~21.65
Vertical : 20.9~23.1
Standard Modes Linearity
Each block (10 %)
Difference between
adjacent blocks (4 %)
Horizontal: Less than 0.88 mm
Vertical : Less than 0.88 mm
Horizontal: Less than 0.82 mm
Vertical : Less than 0.88 mm
D1
D2
D1
Summary of Contents for CA17J Series
