TW966
- 28 -
Hob
Important: Cleaning agents must not come into contact with a heated ceramic glass surface:
All cleaning agents must be removed with adequate amounts of clean water after cleaning
because they can have a caustic effect when the surface becomes hot. Do not use any
aggressive cleaners such as grill or oven sprays, scouring pads or abrasive pan cleaners.
Clean the ceramic glass surface after each use when it is still warm to the touch. This will prevent
spillage from becoming burnt onto the surface. Remove scales, watermarks, fat drippings and metallic
discolouration with the use of a commercially available ceramic glass or stainless steel cleaner.
Light Soiling
Clean the heated area as thoroughly as possible
using SIDOL, STAHLFIX or similar products and
a cloth/paper,then rinse with water and dry with a
clean cloth.
Stubborn Soiling
Using the special scraper (optional) immediately
remove any fragments of aluminium and plastic
material that have unintentionally melted on the
heated cooking area or residues of sugar or food
with a high sugar content(Fig.11). In this way, any
damage to the cooktop surface is prevented.
GB
Fig.11
Cleaning and Care
- 29 -
Technical specifications
R1
R2
R3
R4
POSITION
R1
R2
R3
R4
DIAMETER
145 mm
180 mm
145 mm
180 mm
POWER
1400W
1850W
1400W
1850W
BOOSTER
1800W
2500W
1800W
2500W
Technical Data:
Connection voltage
220-240V ~ 380- 415V 2N 50/60 Hz
Maximum connected load power
7,4 kW
Weight Net
10,9 Kg
Weight Gross
13 Kg
Induction
:
Possible visualizations on display:
This led indicates that the cooking zone is still hot
Absent or inadequate pot
Low Temp function activated
Heat Up function activated
Booster function activated
Overflow Safety Device activated
Temperature levels
Hi-Temperature Safety Device activated
Low voltage
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGES CAUSED
BY BREACHING THE ABOVE WARNINGS.
NOMINAL DIAMETER
OF COIL
LIMIT OF POT DETECTOR
(switches on)
Ø 145 mm
Ø 180 mm
Ø
0
90 mm
Ø 120 mm
Summary of Contents for C61IDGN0
Page 2: ......
