TW966
- 22 -
Installing over an kitchen furniture
If the underside of the appliance will be accessible
after installation, a separator panel
G (fig. 5A) will
need to be mounted maintaining the distances
shown (fig. 5B)..
To allow fresh air circulation there must be openings
in the kitchen furniture (fig. 5A) of the sizes indicated
in fig.5B.
Installing over an oven
If the appliance is installed over an oven the panel
is not necessary (fig. 6A - 6B)
To allow fresh air circulation there must be openings
in the kitchen furniture (fig.6A) of the sizes indicated
in fig.6B
IMPORTANT: if there is an oven under the
induction hob it is advisable for it to have a cooling
fan.Do not use the induction hob while
PYROLITIC
cleaning is in process.
WARNING: to allow the circulation of as
much fresh air as necessary, there must be at
least
40 mm between the induction hob module
and any appliance installed under it (fig. 6B).In any
event, adequate aeration must be provided.
�����
����
�����
����
���������
�����
Fig. 5A
Fig. 5B
�����
����
����
���������
�����
Fig. 6A
Fig.6B
Installing
(continued)
GB
Summary of Contents for C61IDGN0
Page 2: ......
