manualshive.com logo in svg

Samsung C47x series, User Manual

Share
Download
Samsung C47x series User Manual Download Page 68

Basic faxing

68

2. Menu Overview and Basic Setup

Resolution

The default document settings produce good results when using typical text-

based originals. However, if you send originals that are of poor quality, or 

contain photographs, you can adjust the resolution to produce a higher quality 

fax. 

1

Select (fax) 

> (

Menu

) > 

Fax Feature

 > 

Resolution

 on the control 

panel.

2 

Select the option you want and press 

OK

.

•

Standard

: Originals with normal sized characters.

•

Fine

: Originals containing small characters or thin lines or originals 

printed using a dot-matrix printer.

•

Super Fine

: Originals containing extremely fine detail. 

Super Fine

 

mode is enabled only if the machine with which you are 
communicating also supports the Super Fine resolution.

 

•

For memory transmission, 

Super Fine

 mode is not available. The 

resolution setting is automatically changed to 

Fine

.

•

When your machine is set to 

Super Fine

 resolution and the fax machine 

with which you are communicating does not support 

Super Fine

 

resolution, the machine transmits using the highest resolution mode 
supported by the other fax machine.

 

•

Photo Fax

: Originals containing shades of gray or photographs.

3 

Press (

Stop/Clear

) to return to ready mode.

Darkness

You can select the degree of darkness of the original document. 

 

The darkness setting is applied to the current fax job. To change the default 
setting (see "Fax" on page 205).

 

1

Select (fax) 

> (

Menu

) > 

Fax Feature

 > 

Darkness

 on the control 

panel.

2 

Select a darkness level you want.

3 

Press (

Stop/Clear

) to return to ready mode.

Summary of Contents for C47x series




















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands