12
Preparation
English
Instal
lation
Step 1-4 Preparing materials and tools
Materials in the indoor unit package
Make sure that the indoor unit package contains the following
materials:
Mounting bracket (1)
**07*******
**09*******
**12*******
Remote control (1)
Remote control battery (2)
General information (1)
Quick guide (1)
Installation manual (1)
Materials in the outdoor unit package
Make sure that the outdoor unit package contains the
following materials:
Rubber foot (4)
Drain plug (1)
If using a multi system, refer to the manual
supplied with the outdoor unit.
Optional accessories
Insulated assembly pipe,
Ø 6.35 mm (1)
Insulated assembly pipe,
Ø 9.52 mm (1)
**09*******
**12*******
Pipe clamp B (3)
Pipe clamp A (3)
Drain Hose, 2 m long (1)
Foam Insulation (1)
Vinyl tape (2)
PE T3 foam tube
insulation (1)
Putty 100 g (1)
M4 x 25 tapped screw (6)
Cement nail (6)
3-wire Power Cable (1)
3-wire Assembly Cable (1)
2-wire Assembly Cable (1)
NOTE
•
A flare nut is attached to the end of each refrigerant
pipe coming from the evaporator. Use these flare nuts
when connecting the pipes.
Summary of Contents for AR TXFY Series
Page 32: ......
