8
Checking the remote controller
Remote controller buttons
•
Point the remote controller towards the remote controller receiver of the indoor unit.
•
When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit
indicator(
) appears on the remote controller display.
MAX_XSA_IBIM_DB98-33747A_E.pdf
Set/Cancel
Set/Cancel the timer/
mode.
of 24°C~30°C.
.
Smart Saver
Less energy usage makes your space
cool between the temperature range
SPi
SPi : Set the SPi function on/off
Turbo
Operate in auto fan speed to
hr.
min.
Filter
Reset
Auto
Clean
Display
Time Set
cool quickly
Quiet
Reduce noise generated from an indoor unit
during operation.
Power
Mode
Set one of the 5 operating modes
(see pages 10~11 for instructions).
Auto Clean
Auto clean function – Dry inside of the indoor
unit to get rid of odor.
Temp hr. + -
Increase/Decrease the temperature by 1˚C.
On Timer
Set the On Timer on.
Set the current time
Air swing
automatically up and down.
Fan min.
such as Auto/Low/Medium/High.
S
Filter Reset
et the
mode on.
Use 2
nd
function
•
When you press [2
nd
F] button, the indicator will be displayed on the remote controller and you can change
the functions on the remote controller as listed below.
Time Set
If you select the function under the button while the function of the button is switched by 2
nd
F button,
the 2
nd
F function is canceled.
This Button doesn’t have any function.
However Beep sound will come out.
•
Make sure that the water does not get to the remote controller.
On
Timer
