10
Basic operation is an operation mode that can be selected by pressing the
Mode
button.
Auto
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room temperature
detected by the room temperature.
•
If using a multi system, in Auto operation, the system selects a temperature setting and an appropriate operation mode
(COOL or HEAT) based on the room temperature at the start of the operation.
Dry
Dry mode makes the air feel refreshing in a humid climate.
operating at lower or higher temperature than the remote controller set temperature.
Fan
Fan mode can be selected to ventilate your room. Fan mode will be helpful to refresh the stale air in your room.
Cool
In Coo
To activate the Dry mode, remote set temperature must be lower than indoor room temperature.
l mode, the air conditioner will cool your room. You can adjust the temperature and the fan speed to feel cooler in hot
season.
•
If current outside temperatures are much higher than the selected indoor temperature, it may take time to bring the inner
temperature to the desired coolness.
•
Quiet mode(
, ) makes the noise quieter during operating the indoor unit in the Cool mode.
Heat
The air conditioner heats as well as cools. Warm your room with this versatile appliance in the cold of winter.
•
Fan may not operate for about 3~5 minutes at the beginning to prevent any cold blasts while the air conditioner is
warming up.
•
Quiet mode(
, ) makes the noise quieter during operating the indoor unit in the Heat mode.
•
Since the air conditioner heats the room by taking heat energy from outdoor air, the heating capacity may decrease when
outdoor temperature is extremely low.
Use an additional heating appliance in combination with the air conditioner if you feel the air conditioner heats
Basic function
ork
on all
MAX_XSA_IBIM_DB98-33747A_E.pdf
