18
Using advanced functions
Using the Long function
Long function will be helpful when you want the cool or warm air to go to much further place.
1. Turn on the air conditioner.
Press the
Power
button on the remote controller.
2. Set the operation mode.
Press the
Turbo/Long
button on the remote controller twice. Long
indicator will appear on the remote controller display.
The air conditioner operates in High fan speed and you can adjust
the desired temperature.
• Long function is only available in Auto/Cool/Heat* mode.
(*Heat mode is applicable for AP30M1
✴
model only.)
If Long function is selected in Dry/Fan mode, operation mode changes to Auto.
• When using Long function, the air flow blades face upward and vertical air flow direction control is not possible.
• You cannot use Turbo and Long function at the same time.
To deactivate Long function
1. Press the
Turbo/Long
button on the remote controller while Long function is on.
The air conditioner operates in last used mode, or in Auto mode if Dry/Fan mode is most recent mode used.
• While you are using the remote controller, make sure corresponding indicator appears on the remote controller
display.
• Press
Temp +
or
-
button to adjust desired temperature. Each time you press the button, the temperature changes
by 1°C.
• Fan speed is set as High only and cannot be adjusted in Long function.
• In Long function, air flow can be adjusted in horizontal direction only (see page 20 for instructions).
NOTE
NOTE
Mirage_AP30M0@_IBIM_E_34518A(1).indd 18
2012-02-01 오후 4:07:22
