15
EN
G
LIS
H
Fan
Fan mode can be selected to ventilate your room. Fan mode will be helpful to refresh the stale air in your room.
1. Turn on the air conditioner.
Press the
Power
button on the remote controller.
2. Set the operation mode.
Press the
Mode
button on the remote controller until Fan mode
indicator appears on the remote controller display.
The air conditioner operates in Fan mode and circulate the indoor air.
Each time you press the
Mode
button, the mode will change
in order of Auto, Cool, Dry, Fan and Heat*. (*Heat mode is
applicable for AP30M1
✴
model only.)
3. Set the fan speed.
Press the
Fan
or
button on the remote controller to set the
desired fan speed.
Each time you press the
Fan
or
button, fan speed will
change in order of Low, Medium and High.
• While you are using the remote controller, make sure correct indicator which matches your selection appears on the
remote controller display.
• Air flow can be adjusted manually (see page 20 for instructions).
NOTE
NOTE
NOTE
Mirage_AP30M0@_IBIM_E_34518A(1).indd 15
2012-02-01 오후 4:07:18
