45
EN
G
LIS
H
Le
ss
th
an
1
0m
Outdoor
unit
Outdoor
unit
Outdoor
unit
Indoor unit
Indoor unit
Indoor unit
Le
ss
th
an
1
0m
Le
ss
th
an
6
m
(Every 6m)
S-TRAP
Fix the pipe
Fix the pipe
4. Install the high pressure pipe to the heat exchanger liquid pipe, and the low pressure pipe to the heat exchanger gas pipe
respectively using the flare nut, taking care not to cause any leakage of refrigerant.
5. Be sure to insulate the pipe with appropriate insulation material.
6. Insert the extension drain hose to the drain connection port tightly, then fix them with a cable tie or a tape to prevent any
water leakage; see page 48.
7. After completion of the installation, check the connecting area for any gas leakage.
8. Wind a finish tape when the wiring of the refrigerant pipe, the unit, and the drain piping are completed.
9. Fix the piping and drain hose by using the indoor unit piping holder.
Indoor unit piping holder
Indoor unit checking area
Outdoor unit
checking area
Mirage_AP30M0@_IBIM_E_34518A(1).indd 45
2012-02-01 오후 4:07:50
