final Checks and trial operation
final checklist
Check the follows after the installation .
f
f
Installation location and its strength
f
f
Inspection hole installation
f
f
Wiring
f
f
Insulation
Check the operating condition and damper operation .
Setup the ERV wired remote controller
Checks
function
Air volume
operating condition
damper operation
Heat-EX mode
Turbo, High, low
Check the airflow from outdoor
air suction duct and air outlet is
controlled by Turbo, High, low .
located on the corner (Open)
By-Pass mode
Turbo, High, low
located on side (Closed)
f
f
If an error occurs during trial operation, check out the wiring . Turn off the sub power supply and carry out the wiring work
again .
f
f
after the trial operation, explain how to use the ERV to the user and hand over the product with the user’s manual .
temperature range for using and installing the product
Install condition
outdoor air condition
Indoor air condition
0~40 °C, 80 % RH below
-15~50 °C, 80 % RH below
0~40 °C, 80 % RH below
ENGLISH-31
03
o
tHERS
ERV_IM_EN_DB68-05252A-02.indd 31
2016-05-27 오전 11:26:48
