Setting address of the ERV and installation option
Procedure of option setting
f
f
Setting can be done by using a Samsung air conditioner wireless remote controller for indoor units . (Should be purchased
separately .)
[Temp .+] button
[Fan
∧
] button
[Mode] button
[Temp .-] button
[Fan
∨
] button
Entering mode for
option setting
option setting mode
❇
❇
Samsung air conditioner remote controller
(should be purchased separately)
❇
❇
Samsung air conditioner remote controller
(should be purchased separately)
[Temp .+] button
[Fan
∧
] button
[Mode] button
[Temp .-] button
[Fan
∨
] button
Entering mode for
option setting
option setting mode
Step 1. Entering setting mode
1 . Remove batteries from the remote controller .
2 . While pressing and holding the [Temp +] and [Temp -] buttons, insert the batteries .
3 .
Check whether you enter the option setting stage .
Step 2. Procedure of option setting
after entering the option setting stage, select the option as shown below .
•
24 digits are available to be input for the option setting .
•
SEG1, SEG7, SEG13, and SEG19 are page option so they do not need to be set .
•
Set the each 2 bit option code in order except page options . SEG2, SEG3
SEG4, SEG5
SEG6, SEG8
SEG9,
SEG10
SEG11, SEG12
SEG14, SEG15
SEG16, SEG17
SEG18, SEG20
SEG21, SEG22
SEG23, SEG24
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
On(SEG1~12)
Off(SEG13~24)
0
X
X
X
X
X
1
X
X
X
X
X
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
2
X
X
X
X
X
3
X
X
X
X
X
CAUtIoN
ENGLISH-32
ERV_IM_EN_DB68-05252A-02.indd 32
2016-05-27 오전 11:26:49