6
Preparing the installation
Selecting installation location
f
Choose a place with ventilation duct or opening to cool down the heat generated from the product and maintain the
surrounding temperature within Hydro unit : 5 ~ 40 °C, humidity 80 % Hydro unit HT : 5 ~ 35 °C humidity 80 %.
f
Choose a place where structure can bear the weight and vibration of the DVM Hydro unit / Hydro unit HT.
f
Choose a flat place that rainwater does not settle or leak.
f
Choose a well ventilated place with sufficient space for repair and other services.
f
Choose a place where you can easily connect the refrigerant pipes between the DVM Hydro unit / Hydro unit HT and
outdoor unit within allowable distance.
f
Do not install this product in a place where it may corrode.
f
Install the power cable and communication cable of the DVM Hydro unit / Hydro unit HT and outdoor unit at least 1 m
away from the electric appliance such as TV. (In some cases, there may be problem even if there's more than 1m gap from
the electric appliances.)
Space requirement
f
When installing the product, make sure to secure minimum distance with obstacles as shown below.
f
When you install one product on top of the other one, secure at least 600 mm of space on the water pipe side.
Service space (Front)
100
330
600
400
518
300
Service space
(Side)
Installation
space for pipe
Product
(Unit: mm)
k}tGokyvGo{ptXYWZ`]]hTXluUGGG]
YWXZTW_TW]GGG㝘㤸G`a[[aY[
