33
ENGLISH
Setting an indoor unit address and installation option(Continued)
(*5)
This function can be applied to 4 Way Cassette and Mini 4 Way Cassette only. If the air conditioner operates the heating mode
immediately after finishing the cooling mode, the condensated water in the drain pan becomes water vapor by the heat of the
indoor unit heat exchanger. Since the water vapor might be condensed on the indoor unit, which may fall into a living space, use
this function to get rid of the water vapor out of the indoor unit by operating the fan (for maximum 20 minutes) even when the
indoor unit is turned off after cooling mode is turned to heating mode .
Do not install the electronic heater in the flow channel of the indoor unit fan.
Air Flow
Suction side
Discharge side
Electronic heater should
not be installed.
Duct Indoor unit
05 series installation option
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
0
5
Use of Auto Change
Over for HR only in
Auto mode
(When setting SEG3)
Standard heating temp.
Offset
(When setting SEG3)
Standard cooling temp.
Offset
(When setting SEG3)
Standard for mode
change
Heating
→
Cooling
SEG7
SEG8
SEG9
SEG10
SEG11
SEG12
1
(
When setting SEG3)
Standard for mode
change
Cooling
→
Heating
(When setting SEG3)
Time required for mode
change
Compensation option
for Long pipe or height
difference between
indoor units
-
-
SEG13
SEG14
SEG15
SEG16
SEG17
SEG18
2
-
-
-
-
Control variables
when using hot water
/ external heater
SEG19
SEG20
SEG21
SEG22
SEG23
SEG24
3
-
-
-
-
-
NASA_Floor Stand_AM@@@FNFDEH@_IB,IM_EN_03677A-05.indd 33
2016-04-06 오후 2:25:21
