16
How to connect your extended power cables
1. Prepare the following tools.
Tools
Crimping pliers
Connection sleeve
(mm)
Insulation tape
Contraction tube (mm)
Spec
MH-14
20xØ6.5(HxOD)
Width 19mm
70xØ8.0(LxOD)
Shape
2.
As shown in the figure, peel off the shields from the rubber and wire of
the power cable.
-
Peel off 20 mm of the wire shields of the tube.
• After peeling off the tube wire, you must insert a contraction
tube.
• For information about the power cable specifications for indoor
and outdoor units, refer to the installation manual.
CAUTION
(Unit: mm)
120
60
20
20
20
180
Power cable
3. Insert both sides of core wire of the power cable into the connection
sleeve.
f
Method 1
Push the core wire into the sleeve from both sides.
Connection sleeve
f
Method 2
Twist the wire cores together and push it into the sleeve.
Connection sleeve
4.
Using a crimping tool, compress the two points and flip it over and compress another two points in the same
location.
-
The compression dimension should be 8.0.
-
After compressing it, pull both sides of the wire to make sure it is firmly pressed.
Compression
dimension
f
Method 1
Compress it 4 times.
5 mm
f
Method 2
Compress it 4 times.
5 mm
Installation Procedure
CAC CASSETTE TYPE 유럽-터키향_IM_32787A-14_EN.indd 16
2016-05-26 오후 5:18:54
Summary of Contents for AC***FB4DEH
Page 26: ...26 MEMO ...
Page 27: ...27 MEMO ENGLISH ...
