English - 31
Troubleshooting for Anynet
¦
+
Problem
Possible Solution
does not work.
Check if the device is an Anynet
●
+ device. The system
supports devices only.
Connect only one receiver (home theater).
●
Check if the Anynet
●
+ device power cord is properly connected.
Check the Anynet
●
+ device’s Video/Audio/HDMI 1.3 cable
connections.
Check whether Anynet
●
+ (HDMI-CEC) is set to On in the
setup menu.
Check whether the TV remote control is in TV mode.
●
Check whether it is Anynet
●
+ exclusive remote control.
Anynet
●
+ doesn’t work in certain situations. (Searching channels,
Operating, Plug & Play, etc.)
When connecting or removing the HDMI 1.3 cable, please make
●
sure to search devices again or turn your TV off and on again.
Check if the Anynet
●
+ Function of device is set on.
I want to start .
Check if the Anynet
●
+ device is properly connected to the TV and
check if the (HDMI-CEC) is set to On in the
Setup menu.
Press the TV button on the TV remote control to switch to TV.
●
Then press the
TOOLS
button to show the menu and
select a menu you want.
I want to exit .
Select View TV in the Anynet
●
+ menu.
Press the SOURCE button on the TV remote control and select
●
a device other than devices.
Press
●
z
,
CH LIST
,
PRE-CH
, and
FAV.CH
to change
the TV mode. (Note that the channel button operates only when
a tuner-embedded device is not connected.)
The message Connecting
to device...
appears on the screen.
You cannot use the remote control when you are configuring
●
or switching to a view mode.
Use the remote control when the Anynet
●
+ setting or switching to
view mode is complete.
The device does
not play.
You cannot use the play function when Plug & Play is in
●
progress.
The connected device is
not displayed.
Check whether or not the device supports Anynet
●
+ functions.
Check whether or not the HDMI 1.3 cable is properly connected.
●
Check whether Anynet
●
+ (HDMI-CEC) is set to On in the
setup menu.
Search Anynet
●
+ devices again.
You can connect an Anynet
●
+ device using the HDMI 1.3 cable
only. Some Some HDMI cables may not support
functions.
If it is terminated by an abnormal situation such as disconnecting
●
the HDMI cable or power cord or a power failure, please repeat
the device scan.
The TV program cannot
be recorded.
Check whether the antenna jack on the recording device is
●
properly connected.
The TV sound is not
output through the
receiver.
Connect the optical cable between TV and the receiver.
●
BN59-00905F_eng.indd 31
2009-11-10 9:30:45
