Samsung 320BX User Manual Download Page 73

Page: 73 / 171

Using MDC

3 Using MDC

3.4.9

Screen Adjustment

The screen settings (contrast, brightness, etc.) can be adjusted.

Choose display devices from the list of sets, and select the

Picture

tab.

Custom

Select an item and change the corresponding screen setting.

Color

and

Tint

are not available if the input source is

Red

Green

Blue

and

PC Screen Adjustment

are not available if the input source is

Video

Color

Tint

Color Tone

Color Temp

Red

Green

Blue

and

PC Screen Adjustment

are not

available if both

PC Source

and

Video Source

are selected.

Contrast

Adjust the contrast for the selected display device.

Brightness

Adjust the brightness for the selected display device.

Color

Adjust the colors for the selected display device.

Tint (G/R)

Adjust the tint for the selected display device.

Color Tone

Adjust the background color tone for the selected display device.

Color Temp

Adjust the color temperature for the selected display device.

This option is enabled if

Color Tone

is set to

Off

Red

Customize the intensity of red color for the selected display device.

Green

Customize the intensity of green color for the selected display device.

Summary of Contents for 320BX












































































































































































Search results

Summary of Contents for 320BX

Reviews:

Related manuals for 320BX

Brands by name

Popular brands

Samsung 320BX, User Manual

Search results

Summary of Contents for 320BX

Reviews:

Related manuals for 320BX

Brands by name

Popular brands