Samsung 320BX User Manual Download Page 4

Page: 4 / 171

Before Using the Product

Safety Precautions

Symbols

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

This symbol indicates that high voltage is present inside. It is dangerous to

make any kind of contact with any internal part of this product.

This symbol alerts you that important literature concerning operation and

maintenance has been included with this product.

Warning

A serious or fatal injury may result if instructions are not followed.

Caution

Personal injury or damage to properties may result if instructions are

not followed.

Activities marked by this symbol are prohibited.

Instructions marked by this symbol must be followed.

Summary of Contents for 320BX












































































































































































Search results

Summary of Contents for 320BX

Reviews:

Related manuals for 320BX

Brands by name

Popular brands

Samsung 320BX, User Manual

Search results

Summary of Contents for 320BX

Reviews:

Related manuals for 320BX

Brands by name

Popular brands