Samsung 320BX User Manual Download Page 54

Page: 54 / 171

Connecting and Using a Source Device

2 Connecting and Using a Source Device

2.3.3

Connection Using an HDMI-DVI Cable

Connect an HDMI-DVI cable to the [DVI IN] port on the product and the HDMI port on the video

device.

Connect the RCA stereo cable to the [AUDIO IN] port on the product and the matching-colored

AUDIO OUT ports on the video device.

Press the

SOURCE

button on the remote control to change the source to

DVI

Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable.

To resolve this, additionally connect an audio cable to the audio ports on the product and video

device. When you connect a video device to the product using an HDMI-DVI cable, set

Edit Name

DVI Devices

to access video and audio content stored on the video device.

Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.

AUDIO IN

DVI IN

Summary of Contents for 320BX












































































































































































Search results

Summary of Contents for 320BX

Reviews:

Related manuals for 320BX

Brands by name

Popular brands

Samsung 320BX, User Manual

Search results

Summary of Contents for 320BX

Reviews:

Related manuals for 320BX

Brands by name

Popular brands