Samsung 320BX User Manual Download Page 148

Page: 148 / 171

148

Troubleshooting Guide

7 Troubleshooting Guide

7.1.3

Check the followings.

Installation issue (PC mode)

The screen keeps switching on and off.

Check the cable connection between the

product and PC, and ensure the connection is

secure.

("2.2 Connecting and Using a PC")

Blank spaces are found at the top and bottom

of the screen when an HDMI or HDMI-DVI

cable is connected to the monitor and PC.

Blank spaces on the screen are not caused by

the monitor.

The cause of the problem is the PC or graphics

card, and can be fixed by adjusting the screen

size in the HDMI or DVI option of the graphics

card settings menu.

If the graphics card settings menu has no

option to adjust the screen size, update the

graphics card driver to the latest version.

(Please contact the graphics card or computer

manufacturer for details on how to adjust the

screen settings.)

Screen issue

The power LED is off. The screen will not

switch on.

Make sure that the power cord is connected.

("2.2 Connecting and Using a PC")

No Signal

" is displayed on the screen (refer to

"Connecting to a PC").

Check that the product is connected correctly

with a cable

("2.2 Connecting and Using a PC")

Check that the device connected to the

product is powered on.

Not Optimum Mode

" is displayed.

This message is displayed when a signal from

the graphics card exceeds the product's

maximum resolution and frequency.

Refer to the Standard Signal Mode Table and

set the maximum resolution and frequency

according to the product specifications.

The images on the screen look distorted.

Check the cable connection to the product

("2.2 Connecting and Using a PC")

Summary of Contents for 320BX












































































































































































Search results

Summary of Contents for 320BX

Reviews:

Related manuals for 320BX

Brands by name

Popular brands

Samsung 320BX, User Manual

Search results

Summary of Contents for 320BX

Reviews:

Related manuals for 320BX

Brands by name

Popular brands