Samsung 120815 - Digimax Pro 815 8MP Digital Camera User Manual Download Page 131

Page: 131 / 164

131

Set USB

[USB] sub menu and connected device are not matched.

Reconfigure [USB] in the [Setup] menu.

Out Of Number

When selecting too many printing pages in the PictBridge menu.

Select printing page within the limitation.

Please check the following

The camera doesn’t switch on

There is low battery capacity.

Insert charged battery.

The camera power ceases while in use.

The battery is exhausted.

Insert charged battery.

The Camera is turned off automatically.

Turn on the camera power again.

Battery drain quickly

The Camera is being used in low temperatures.

Keep the camera in warm conditions (i.e. inside a coat or jacket) and only remove it in

order to take images.

Before contacting a service centre

Warning indicator

Summary of Contents for 120815 - Digimax Pro 815 8MP Digital Camera





































































































































































Search results

Summary of Contents for 120815 - Digimax Pro 815 8MP Digital Camera

Reviews:

Related manuals for 120815 - Digimax Pro 815 8MP Digital Camera

Brands by name

Popular brands

Samsung 120815 - Digimax Pro 815 8MP Digital Camera, User Manual

Search results

Summary of Contents for 120815 - Digimax Pro 815 8MP Digital Camera

Reviews:

Related manuals for 120815 - Digimax Pro 815 8MP Digital Camera

Brands by name

Popular brands