Samson EB 3773 Series, Mounting And Operating Instructions

Page: 34 / 68

9-4 EB 3773 EN
Servicing
Table 9-1: Recommended inspection and testing
Inspection and testing Action to be taken in the event of a negative re -
sult
Check the markings, labels and nameplates on
the limit switch for their readability and complete-
ness.
Contact SAMSON when nameplates or labels are
damaged, missing or incorrect to renew them.
Clean any inscriptions that are covered with dirt
and are illegible.
Check the limit switch to ensure it is mounted firm -
ly.
Tighten the any loose mounting screws.
Check the power supply wires. Tighten any loose cable glands.
Make sure that the stranded wires are pushed into
the terminals and tighten any loose screws on the
the terminals.
Renew damaged lines.