Samson EB 3773 Series, Mounting And Operating Instructions

Page: 19 / 68

EB 3773 EN 4-1
Shipment and on-site transport
4 Shipment and on-site trans -
port
The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
4.1 Accepting the delivered
goods
After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Check that
the specifications on the nameplate of the
limit switch match the specifications in
the delivery note. See the 'Markings on
the device' section for nameplate details.
2. Check the shipment for transportation
damage. Report any damage to
SAMSON and the forwarding agent
(refer to delivery note).
4.2 Removing the packaging
from the limit switch
Observe the following sequence:
Î
Do not remove the packaging until im-
mediately before installation of the limit
switch.
Î
Dispose and recycle the packaging in
accordance with the local regulations.
4.3 Transporting the limit
switch
Transport instructions
− Protect the limit switch against external
influences (e.g. impact).
− Protect the limit switch against moisture
and dirt.
− Observe transport temperature
depending on the permissible ambient
temperature (see the 'Design and
principle of operation' section).
4.4 Storing the limit switch
Risk of damage to the limit switch due to
improper storage.
Î
Observe the storage instructions.
Î
Avoid long storage times.
Î
Contact SAMSON in case of different
storage conditions.
We recommend regularly checking the pre-
vailing storage conditions during long stor-
age periods.
Storage instructions
− Protect the limit switch against external
influences (e.g. impact, shocks, vibra -
tion).
NOTICE !
Note !