Samson 6132, Mounting And Operating Instructions

Page: 25 / 44

EB 6132 EN 8-1
Malfunction
8 Malfunction
Risk of fatal injury due to electric shock
(devices with 230 V supply voltage).
Î
Before connecting wiring, performing
any work on the device or opening the
device, disconnect the supply voltage
and protect it against unintentional re-
connection.
Î
Only use power interruption devices that
are protected against unintentional re-
connection of the power supply.
Risk of converter damage due to the maxi-
mum pressure at the converter input being
exceeded.
The maximum permissible pressure at the
converter input is restricted to 2 bar.
Î
Make sure that the input signal does not
exceed 2 bar.
8.1 Troubleshooting
Î
See Table 8-1
Contact SAMSON's After-sales Service for
malfunctions not listed in the table.
8.2 Emergency action
Plant operators are responsible for emergen-
cy action to be taken in the plant.
In the event of a converter malfunction:
1. Perform troubleshooting.
2. Rectify those malfunctions that can be
remedied based on the instructions pro-
vided here. Contact our after-sales ser -
vice in all other cases.
Putting the device back into operation after
a malfunction
See the 'Start-up' section.
DANGER !
NOTICE !
Note