Samson 3321, Mounting And Operating Instructions

Page: 23 / 56

EB 8111/8112 EN 23
Measures
Risk of valve damage due to incorrectly at -
tached slings.
−
When lifting the control valve, make sure
that the slings attached to the valve body
bear the entire load.
− Do not attach load-bearing slings to the
actuator, handwheel or any other parts.
− Observe lifting instructions (see sec -
tion 4.2.2).
SAMSON's After-sales Service department
can provide more detailed transport and lift
-
ing instructions on request.
4.2.1 Transporting
The control valve can be transported using
lifting equipment (e.g. crane or forklift).
Î
Leave the control valve in its transport
container or on the pallet to transport it.
Î
Observe the transport instructions.
Transport instructions
− Protect the control valve against external
influences (e.g. impact).
− Do not damage the corrosion protection
(paint, surface coatings). Remove any
damage immediately.
−
Protect the control valve against moisture
and dirt.
−
The permissible transportation tempera -
ture of standard control valves is –20 to
+65 °C (–4 to +149 °F).
Contact SAMSON's After-sales Service de -
partment for the transportation temperatures
of other valve versions.
4.2.2 Lifting
To install a large valve into the pipeline, use
lifting equipment (e.g. crane or forklift) to lift
it.
Lifting instructions
− Secure slings against slipping.
− Make sure the slings can be removed
from the valve once it has been installed
into the pipeline.
−
Prevent the control valve from tilting or
tipping.
−
Do not leave loads suspended when in -
terrupting work for longer periods of
time.
−
Make sure that the axis of the pipeline is
always horizontal during lifting and the
axis of the plug stem is always vertical.
NOTICE !
Tip
Note