Samson 2404-2, Mounting And Operating Instructions

Page: 8 / 76

1-4 EB 2540 EN
Safety instructions and measures
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
−
Mounting and operating instructions for
e.g. Type 2 N or 2 NI Strainer
u
EB 1015
e.g. Type 2406 Excess Pressure Valve
u
EB 2522
e.g. Type 2441 Pressure Reducing Valve
u
EB 2626-1
−
Mounting and operating instructions as well as data sheets for additional fittings (e.g.
shut-off valves, pressure gauges etc.).
1.1 Notes on possible severe personal injury
DANGER !
Risk of bursting in pressure equipment.
Regulators and pipelines are pressure equipment. Impermissible pressure or improper
opening can lead to regulator components bursting.
Î
Observe the maximum permissible pressure for regulator and plant.
Î
If necessary, a suitable overpressure protection must be installed on site in the plant
section.
Î
Before starting any work on the regulator, depressurize all plant sections affected
as well as the regulator.
Î
Drain the process medium from all the plant sections affected as well as the regula -
tor.
Î
Wear personal protective equipment.