SPECIFICATION VER1.0
5-1
1. SCOPE
These specifications describe all the characteristics of the 34 inch color monitor.
2. ELECTRICAL
REQUIREMENTS
2.1. Cathode
ray
tube
a. Tube size
34 inch (4:3)
b. Dot pitch
H = 0.8 mm (center)
c. Light transmission
35.5% typical
d. CRT TYPE NAME
TOSHIBA
2.2. Power
a. Input voltage
100 ~ 240 Vac , 50 / 60 Hz
b. Input current
3 A at 110 Vac / 60 Hz
c. Inrush current
50 A
d. Power consumption
220 Watts
e. Line regulation
95 to 145 Vac / 60 Hz ~ 190 to 255 Vac / 50Hz
f. Stand-by
less than 10 watts
2.3. Input
signal
2.3.1 Video
signal
a. Type
Analog
b. Polarity
Positive
c. Amplitude
0.714 V
P-P
d. Input impedance
75 ohms
e. Dot rate
75M Hz (Max.)
2.3.2 Horizontal
sync
a. Type
TTL
b. Polarity
Positive or Negative
c. Input impedance
1K ohms
d. Frequency
RGB
AV,YCBCR
: 31KHz to 52KHz
: 15.734KHz (NTSC) / 60Hz
: 15.625KHz (PAL) / 50Hz
2.3.3 Vertical
sync
a. Type
TTL
b. Polarity
Positive or negative
c. Input impedance
1K ohm (Min.)
d. Frequency
50 Hz to 120 Hz
2.3.4
Connector type
15 pin D-SUB and RCA JACK and S-terminal
2.3.5
Pin assignments for D-SUB connector
Pin 1 : RED
Pin 6
: RED GND
Pin 11 : GND
Pin 2 : GREEN
Pin 7
: GREEN GND
Pin 12 : SDA
Pin 3 : BLUE
Pin 8
: BLUE GND
Pin 13 : H-SYNC
Pin 4 : GND
Pin 9
: NC
Pin 14 : V-SYNC
Pin 5 : GND
Pin 10 : GND
Pin 15 : SCL
Summary of Contents for SME-27FDL5
