Sampo SME-27FDL5, Service Manual

Page: 15 / 95

FACTORY ADJUSTED METHOD AND ORDER VER
1.0
3
-6
GEOMETRY-ADJ. ITEM
ADJ. MIN. MAX.
H CORNER H corner adjustment
MENU+ ( STD and CHG )
H-PIN-BALANCE H pincushion balance
adjustment
V-LINEARITY V linearity adjustment
V-LIN-BALANCE V linearity balance adjustment
PINCUSHION pincushion size adjustment
( STD and CHG )
TRAPEZOID trapezoid adjustment
( STD and CHG )
PARALLELOGRAM parallelogram adjustment
( STD and CHG )
V-SIZE V size adjustment
V-CENTER V center adjustment center
point
H-WIDTH H width adjustment
( STD and CHG )
H-PHASE H phase adjustment
Center point
Rotation Rotation adjustment
L BLK Left Half Blanking Adjustment
( this function no use )
R BLK Right Half Blanking Adjustment
( this function no use )
The standard size.
H-Size: 620mm
V-Size: 465mm
MENU -